Using Formulas in Groundplan
  • 03 Oct 2024
  • 4 Minutes to read
  • Dark
    Light
  • PDF

Using Formulas in Groundplan

  • Dark
    Light
  • PDF

Article summary

This article establishes what Supported References are, Formula terms and gives examples with explanations for common Formula used within Groundplan.

formula-explanation-infographic.png

Summary Notes

  • All Formula must start with an equal sign (=) and include one of the Supported References associated with the Measurement.
  • Either whole or decimal numbers can be used.
  • Groundplan works in metres (feet for imperial customers).
  • Parts and Labour may follow our Grouping rules although Formula is not included within the rules.
  • Measurement Parts and Labour article gives step by step instructions to implement Formula.
  • Groundplan Formulas follow the PMDAS Rule.
    ie: Parentheses (brackets) followed by multiplication, division, addition then subtraction. Calculations within brackets are prioritised. The Totals after any Formula is applied to a Part will be displayed in the bill of materials on the Quantities tab.
TermExplained
+Addition
-Subtract or create a negative total
*Multiply (SHIFT 8 to create a * )
/Divide
ceil(x)Rounds the total (x) and/or Formula inside the brackets up to the nearest whole number.
floor(x)Rounds the total (x) and/or Formula inside the brackets down to the nearest whole number.
Unit of MeasureDisplayed on the bill of materials and represents the Part being quantified. Some examples include ea, bags, sheets, rods, pipes, m, m², m³. (Supported references will not reference this UOM for calculations).


Supported References

Formulas for Parts within a Measurement include related Supported References. These References vary according to the Measurement type (Count vs Length vs Area). Each Formula must contain a Supported Reference/s to be accepted.

Support References can be used in conjunction with Excel-type Formulas to calculate Parts and/or Labour for a Measurement.




Count Measurement Parts Supported References

How Count Supported References correspond to a Plan:
formula-count-supported-reference.png

Count Formula examples

FormulaExplainedUnit of Measure
=count*8For every Count, multiply the item by 8 metresm
=count*5/100For every Count, allow 5 items divided by 100 (or amount in a bag)bags
= -countCreate a negative Countea




Length Measurement Parts Supported References

How the main Length Supported References correspond to a Plan:

formula-length-supported-reference-1.png

Length Measurement Unit of Measure (UoM)Part Supported References
image.png


image.png
image.png



image.png
image.png



image.png

Length Formula examples

FormulaExplainedUnit of Measure
=len/6Total length divided by 6, (counting one length every 6 metres)lengths
=len*2.4Total length multiplied by height OR depth
=ceil(len*2)Total length multiplied by 2 and rounded up to the next whole number (ceil)m
=segments*2Each time clicked to change direction multiplied by 2 items along each segmentea
=len+count*5Total length add an additional 5m for each runm
=ceil(len*2.4/2.88)Total length multiplied by the height and divided by the area covered by a product rounded up to the next whole number (ceil)sheets
=(len/1.5)+count*2Total length divided by how often a post is (1.5m) and add for each run 2 extra posts (for each end)posts
=volume*1.10Volume multiplied by 10% wastage




Area Measurement Parts Supported References

How the main Area Supported References correspond to a Plan:
formula-area-supported-reference.png

Area Measurement Unit of Measure (UoM)Part Unit of Measure (UoM) choices
image.png


image.png
image.png



image.png
image.png



image.png

Area Formula examples

FormulaExplainedUnit of Measure
=area*1.5Area multiplied by height OR depth
=lenPerimeter of the aream
=ceil(len/6)Perimeter of the area (including any cut outs) divided by 6m lengths rounded up to the next whole numberlengths
=area+(len*0.2)Area added to (perimeter multiplied by 200mm high)
=area/7.2Total area divided by the area of a sheet / product (7.2m2)sheets
=area*4/100In each m² there are 4 items required divided by the amount in a bagbag
=countEach area createdea
=volume*1.10Volume multiplied by 10% wastage
=area*1.10Total area multiplied by 10% wastage
=ceil(tiles)Total sheets size populated then rounded up to the next whole number (ceil)sheets




To note:

Single Length Formula

Singling out individual Length / Areas to apply Formula to is not supported in Groundplan.

For example in the image below, applying Formula to the length measured in the Master Bedroom only is not possible.

Length and Area Formulas apply to all Lengths / Areas created within a Measurement. For this particular example, a separate Measurement would need to be created for the Master Bed and then apply the Formula required.
formula-warning-example1.png

For further information on specific industry examples, please consult the following articles:

"IF" Formula is not Supported

Currently, Groundplan does not support "IF" rules in Formula.

eg.
IF (area<160,108, (area/2.22)+36)
Explained: If the area of the slab is greater than 160m2, the total labour hours for a standard slab is 108hrs. Otherwise, the labour is calculated as area/2.22 + 36hrs

We suggest using a program such as Excel for these Formula calculations.

For Formula assistance, please reach out to Support. Go to: Help > Send us a Message.



💡Accessed your Company's free 1 hour Training Session?

Organise your session today! Click Help > Send us a Message and ask to book in for free training.

Trainers can assist with:

  • Workflow solutions
  • Time-saving tips
  • Making sure you're getting the most out of your subscription

If you've accessed your free training and need further Support, reach out to book a 1 or 2 hour paid session.



Was this article helpful?