Before reading this article, ensure you have read Measurement - parts & labour and Using formula within Groundplan articles to aid in understanding the following formula examples.

📝The formula values provided in this article are for example purposes only.

Term	Explained
`len`	total metres measured
`area`	total square metres measured
`len or area / x`	total length/area divided by an `amount`
*`len or area x`**	total length/area multiplied by an `amount`
*`+ count x`**	add the number of individual runs drawn multiplied by an `amount`
`ceil(x)`	rounding up a decimal value to the next whole number

Fencing

Example parts for a 1.8m high fencing length measurement:

⚠️Warning: This example does NOT use the height component in the measurement unit section:

Part	Explanation	Formula	UoM
Fence Rails 75mm x 38mm x 4800mm	How many `4.8m lengths` of fence rail required to install `3 rails`	*`ceil(len /4.83)`**	lengths
Fence Pailings 100mm x 17mm x 1800mm	How many `100mm wide` pailings required for the length measured	*`ceil(len0.1)`**	each
Hardwood Posts 200mm x 200mm x 2400mm	Posts required `every 2.4m` and allowing for an `additional post at the beginning and end of each run`	*`ceil(len/2.4+count2)`**	each
Concrete 20kg ready set bag	Bag required for `each hardwood post`	*`(len/2.4)+count2`**	bags

Turf

Example parts for a sir walter turf area measurement:

⚠️Warning: This example does NOT use the height component in the measurement unit section.

Part	Explanation	Formula	UoM
Sir Walter Turf (1 m2 is covered by approximately 1 roll)	How many `rolls` are required for the area	`ceil(area)`	rolls
Top soil	How many `m3` is required when the top soil is `200mm` thick	*`(area0.2)`**	m3

Example parts for a 150mm thickness concrete area measurement:

📝Note: This example uses the depth section of the measurement unit.

Part	Explanation	Formula	UoM
Concrete 150mm	How much m³ of concrete which the `150mm` depth is automatically applied for the area drawn	`volume`	m³
Formwork	How many metres of formwork is required for the `perimeter around the area` measured	`len`	m
Steel mesh 4.56m x 1.97m (7.5m2 coverage)	How many `7.5m2 coverage` sheets are required for the area measured	`ceil(area/7.5)`	sheets
Bar chairs (pk500)	How many chairs are required to support the steel mesh with `4 per m2` and come in a `bag of 500` for the area drawn	*`ceil(area4/500)`**	bags

For formula assistance, please reach out to Support. Go to: Help > Send us a Message.

💻Accessed free training?

Arrange your free training by clicking Help > Send us a Message. Our trainers are ready to help with:

Alternatively, visit the Groundplan Academy here for self-directed courses.