Contents x
    Grid Tool
    • 30 Apr 2024
    • 2 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Grid Tool

    • Updated on 30 Apr 2024
    • 2 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    Enabling the Grid Tool places a Grid over a Plan to assist you in defining spaces or measurements, Eg. easements, spacing items.

    💡Using an iPad or Tablet?

    Enable the Grid Tool

    1. From within a Plan click the Scale Tab
    2. Set the Scale
    3. Click Enable Grid
    4. Enter Width and/or Height of the Grid
      The default unit of measure is metre (enter 1 or 1m)
      Other accepted units of measure are millimetres, centimetres, feet and inches
    5. (optional) Adjust Angle of Grid
    6. Click Disable Grid to remove the Grid
    💡 Grid is static

    Use click, hold and drag / zoom options to align Plan against the Grid

    Grid - Rotate V1

    Grid Tool with Smart Guides Enabled

    Smart Guides can be used when the Grid Tool is enabled. It assists to align consecutive Counts by automatically snapping to crosshairs of the Grid lines, the centre of each line and centre space.

    To enable Smart Guides with the Grid:

    1. Enable the Grid Tool
    2. Click on a Count in the Stage
    3. Click Settings
    4. Click Smart Guides
    5. Click to place Symbols

    Find out more about Smart Guides here.

    Grid tool with smart guide v3


    Using an iPad or Tablet?

    Click for alternate terminology.

    Things to note when following the above steps:

    • Tap instead of click
    • Unless there is a keyboard attached to the device, there are no shortcut keys on an iPad or Tablet
    • Tap Done instead of pressing ESC

    Navigation hints:

    • Pinch zoom
    • Tap hold and drag to pan around a Plan

    Smart Guides cannot be used with devices unless there is a mouse connected.

    Images within this article are taken from a desktop computer. Interface appearance on an iPad / Tablet devices may vary based on screen size, potentially hiding or shortening buttons to icons. For accuracy, consider using a stylus, Apple pencil or mouse.


    Frequently Asked Questions

    Can I stop the Grid from "moving" when I zoom in on my Plan?

    No. The Grid Tool adjusts to match the Scale of the Plan when zooming. Zoom to the required level and then move the Plan to align with the Grid. Ideally, line one room up at a time.

    💡 Lock Plan Panning

    Press ALT (⌥ OPTION) + L to prevent the Plan from being moved with the mouse click and drag gesture. Unlock by using the same keys.


    Will the Grid be included when I export my Plan?

    No. The Grid will not show on Exported Plan/s. This is an onscreen feature only.



    Was this article helpful?
    What's Next